|
Please calculate the process time for roller burnishing on this page. Select parameters from table below and
punch them into input frames:
-
|
Length and diameter of the surface to be treated (bores or ODs). For tapers, input the average diameter. For complex contours, please ask for assistance
|
-
|
Circumferential speed 200 m/min
|
-
|
Feed rates according to following table:
|
|
Tool
|
Action Type
|
Feed Rate
(mm/rev)
|
|
multiple rolls
|
axially
|
1 - 2
|
|
single roll
|
radially
|
0,2 - 0,6
|
|
ballpoint
|
radially
|
0,1 - 0,4
|
|
ballpoint
|
Hard R.B.
|
0,08 - 0,2
|
These figures shall give you a first idea about the possible saving potential. For more details and technical advise,
please let us have your inquiry by e-mail, FAX or mail. We will recommend you optimal tooling and parameters for
your application.
You can calculate the Return On Investment in the second part of the calculation sheet after you have figured out the
time savings through roller burnishing. Input the investment and your own data. The output will show the monetary savings
and the time for ROI.
|
|
ECOROLL tools often return their investment within few month. This why also you should change to roller burnishing!
Pricacy statement/Imprint
|
