Homepage    Contact    Sitemap     English    Search
 
Combined skiver and roller burnishing tools type RDO, RIO and OMEGA
 for cylinders and internal surfaces
Diameter range 60 – 400 mm




Characteristics
  • Extremely short primary machining time
  • Enhanced cutting performance (cutting speed up to 300 m/min, feed rates of 3-6 mm/rev.)
  • Significant cost reduction
  • After machining, the roller head automatically collapses; the tool can be retracted quickly without damaging the work piece.

Get the Flash Player to see this player.
    The RDO and RIO tools equipped with the OMEGA peeling head machine cylinder liners. The liners are peeled and roller burnished in a single pass. In addition these tools effect correction of circularity defects in the liner and as a result twist is significantly reduced or even eliminated.



OMEGA peeling head
  • For applications without twist problems: Economy version with 2 skivers
  • For applications with twist problems; diameter range 60-400 mm: Version with 2 or 3 skivers
  • For applications with severe twist problems; diameter range 205-400 mm: Version with 6 skivers
  • The radial floating cutters center themselves in such a manner that both cutting edges remove almost identical thicknesses of chip.





Introduction | SK | GZ | RDS | RDO and RIO, OMEGA | Back to product selection

 Print this page